Zapco STUDIO 500 Manuel d'utilisateur télécharger pdf (Page 8)

tells you the amp is on. The Red LED lets you know the amp is in

“protecon” because of some problem with the system.

6. Fuses The fuses protect the car should a catastrophic problem occur in

the amp. Always replace with the same size fuse

The ST-5X

Five channel, compact chassis car amplier with mono bass secon

ST-5X Input

1. RCA IN connectors for Front, Rear, and Sub are to connect the ST-5X to

an aermarket head unit ‘s outputs (See also item 9)

2. Front and Rear Gain: These controls balance the output of the head unit

to the input of the amp and balance the front-to-rear-to-sub levels. (See

"Install Sense" secon)

3. Front and Rear LPF controls set the crossover point when using the low

pass crossover lters.

4. Front and Rear Crossover selectors determine high pass, low pass, or full

range for the front and rear channels.

5. Front and rear HPF controls set the HP frequency when the high pass

crossover lters

6. LPF control sets the sub crossover frequency when using the sub low

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Pas de commentaire

Zapco STUDIO 500 Manuel d'utilisateur Page 8